DSX Intelligent Controllers
and Power Supplies
We have engineered one of the finest products in the industry. Each of these controllers has been designed for
a specific purpose and tested to meet those needs. Choose the
controller that fits your needs. All DSX Controllers are
designed and built for commercial and industrial use and carry a
UL 294 and 1076 listing.
DSX Intelligent Controllers are independent processing panels designed to be cost effective building blocks that allow expansion in a scalable manner. Each controller has a different combination of inputs, outputs and reader ports. Up to four 1040 series controllers of any type can be combined in the same enclosure to form a package. There are two Door Packages that can have 1-3 more controllers ordered separately and installed to build the package out to meet the requirements.
Each Controller operates as a fully intelligent and independent control panel that retains all data necessary for system operation in its own RAM. With an integral real-time Clock and Calendar each panel performs Time Zone control with Holiday overrides for inputs, outputs, and cards even when communication to the PC or other controllers is not available.
These Commercial and Industrial rated controllers are strategically placed throughout the customer’s location connected with a two twisted pair cable. The first or master controller can be connected via LAN, USB, or Dialup Modem and subsequent controllers are then connected using a two twisted pair cable. The DSX-IP-HUB can be used to allow IP Communications with each controller or cluster of controllers over the LAN instead of just the first controller. This keeps wiring from the door to the panel short and keeps the panels in convenient and secure areas. There are several different controllers to choose from depending on the requirements of the job.
- The DSX-1042 Intelligent Controller has
independent reader ports, 8 inputs, 2 relay outputs, 2 open
collector outputs, and 2 prewarn outputs.
- The DSX-1048 Pkg is an 8 door package
using 4 - 1042 Intelligent Controllers in an 8 door enclosure
and includes a 1040 CDM Communications Distribution
and a 1040-PDP integrated power supply. Lock Power Module sold separate.
- The DSX-1042 Pkg is
a 2 door package using 1 - 1042 Intelligent Controller in the
1040E 8 door enclosure with a 1040 CDM Communications Distribution Module and a 1040 PDP integrated power supply. This is the
expansion package and could be used where there is a 2 door
immediate need with room to add 6 additional doors. Additional
1042, 1043, and 1044 intelligent controllers may be purchased to
add to this package. Lock Power Module sold separate.
- The DSX-1043 Output
Controller is a Controller with 16 Form C relays, 2
inputs, and an Output Override Input.
- The DSX-1044 Input Controller is a Controller with 32
inputs, 4 open collector outputs. Each Input supports 2,3, and 4
state monitoring and has a Status LED.
- The DSX-1022 Intelligent Controller is ideal where only two readers are required. This small form factor can be used in an elevator control room or parking garage gate controller. It has the same functionality as the DSX-1042 but contains an integral power supply. The DSX-1022 Intelligent Controller has 2 reader ports, 8 inputs, 4 relay outputs, 2 prewarn outputs, built in power supply and battery charger. Transformer and battery sold separate.