|
DSX Access Systems, Inc. |
Controller Addressing
Controller Addressing
Each Controller has an 8
position dipswitch to set its address. The Master Controller is addressed as
the Location number and has switch 8 turned on. Turn on switches 1-7 to set the
Location number. Each switch has a binary value and when added together equal
the Location number. Add the values of each switch turned on. To set the Master
address above 127 set switches 1-7 off and program the address using KB2CW.exe
from the WinDSX directory.
Set the Slave device address
starting at 2. Both Devices of all controllers must be defined in the database
but only the even number is programmed by the dipswitches. Side A = even number
set by the switches. Side B = next
highest odd number.
The Master is always device
address 0 & 1 in the database. Switch 8 is only turned on at the Master
Controller.
1048 Controller
Addressing
DSX-1022 Controller Addressing
