|
DSX Access Systems, Inc. |
DSX-Time Display Modules
DSX-TDM and
DSX-TDM5
Overview
The TDM Modules are typically used in
Time and Attendance applications where the time must be displayed to those who
are clocking in or out. DSX offers 2 sizes of Time Display Module. The original
unit provides a 1”x 4”display. The new unit provides a 5”x16” display. Each
Module uses four 7-segment LED displays.
The Time Display Module is typically connected to
Slave Controllers. When connected to a Slave Controller the time is updated
once a minute by the Master Controller. When there is only one controller in
the location the TDM is connected to the Master Controller and is updated once
a minute by the Comm Server PC. In this configuration
the Comm Server PC must remain connected to the
Location at all times for the TDM to display the correct time. A TDM or TDM5
will not operate correctly in a modem connected site if the site includes only
one controller (the Master controller).
Application
Time and Attendance using WinDSX requires
a minimum of 2 readers. The readers are defined as Time and Attendance In or
Time and Attendance Out under Device in the Database section of the Software.
Using WinDSX a History report can provide the total time that persons were
clocked in. The report can be displayed, printed or exported to formats used by
Third Party software that calculate pay rates. In this application the readers are
typically located in a commons area of the facility and the Time Display Module
is mounted near the In and Out Readers.
DSX-TDM
Size
2
5/8” H x 51/4” W x 1 1/8
D
Power
12
Weight
1lb.
DSX-TDM5
Size
8
3/8” H x 18” W x
3 ˝ D
Power
16.5 VAC 40VA Xfmr
Weight
6.5lb.